Page 2180 - Foton Workshop Manual - Aumark (BJ1099)

62-128 DIAGNOSIS-POWER DOOR LOCK

Is the result normal?
Yes>To step 6.
No >Repair or replace the harness.

6. Check Central Locking Switch

(a). Disconnect the connector J10 of the central lock switch.

(b). Measure the resistance between the No.1
and the No.2 pin of the connector J10 on
the central lock switch with the multimeter.
Standard resistance:

Multimeter Specified
Conditions
connection value

Central lock J10 (2) - J10 (1)
switch OFF
＜ 2 Ω
Central lock J10 (2) - J10 (1)
switch ON
Is the result normal?
Yes>To step7.
No >change central lock switch.。

7. Check harness and connector (Driver door control switch-grounding)

(a). Disconnect the driver door locks connectors
J07.

fuwx62461

Page 2180