Page 1689 - Foton Workshop Manual - Tunland (AT)

AXLE AND PROPELLER SHAFT - FRONT DIFFERENTIAL ASSEMBLY 34-29

(c) Tighten the retaining bolts of the driven gear.
Thread sealant and other impurities.

NOTICE

• When removing all retaining bolts, replace
new ones.
• When installing bolts, apply two drops of
thread sealant on the thread.

16 . Install the Differential Assembly
(a) Install 2 differential bearing outer rings.

NOTICE

Install it by left/right as marked.

(b) Install the differential assembly.

34

(c) Ensure the distance between the main
reducer housing and the mounting end of the
differential bearing on the differential housing.

Page 1689