Page 94 - RotF - Electrical Specification_Neat

GENERAL ELECTRICAL SPECIFICATION
Version 2014-2

A.1 KITCHEN EQUIPMENT

The Electrical Contractor shall provide power supplies as per the H&K equipment schedules, in the
absence of complete information allow for the following, unless otherwise indicated by or as
directed by the Project Manager:

ISLAND PREP TABLE

Item Electrical Requirements
Description Location Circuit
Protection Connector Cable size
Located above the ceiling 4-pole 63A1 x 63A TP&N in-line 5-core
2
over the assembly table Type C MCB IP67 ceeform socket, 25mm YY
(OAT) & RCD part no 14212
Located above the ceiling 2 x 4-pole 2 x 32A TP&N in-line 5-core
2
over each end of the centre 32A Type C IP67 ceeform sockets, 6mm YY
section, allow sufficient MCBs par
&t no 3907
flex length to relocate to RCDs
phase 2 positions.
MFY Pre table Located above the ceiling, 4-pole 63A1 x 63A TP&N in-line 5-core
(Phase 1) 2
63A TP&N socket to be Type C MCB IP67 ceeform socket 25mm YY
positioned to suit phase 2 & RCD (part no 14212) with
requirements; between 63A TP&N IP67 in-line
toasters and microwave plug (part no 13212)
table, flex to extend 32A and short cable to 32A
TP&N socket to suit phase TP&N IP67 -line in
1 requirement. ceeform socket, part no
3907
Retained from phase 1 4-pole 63A1 x 63A TP&N IP67 5-core
2
installation Type C MCB Ceeform socket, part no 25mm YY
& RCD 14212.

Retained from phase 1 2 x 4-pole 2 x 32A TP&N IP67 5-core
2
MFY Pre table installation, relocated to 32A Type C Ceeform sockets, part 6mm YY
&
(Phase 2) suit phase 2 equipment MCBs no 3907.
arrangements RCDs
Retain 63A outlet from 4-pole 63A1 x 63A TP&N IP67 5-core
2
phase 1, remove 63A plug Type C MCB Ceeform socket, part no 25mm YY
and flex to 32A socket, & RCD 14212
retain for future use.

McDonalds Restaurants Ltd

72