Page 211 - FreesStyler® Installation and Startup

®
INSTALLATION AND STARTUP

Chapter 10 Initial Startup

Startup Procedure

SCC
s) Enter Passenger Side In: Move the entrance passenger side arm in toward
the vehicle (all the way) and verify that the oval is filled. Adjust the Reed
Switch if necessary.
t) Bit 1, 2, 3 and 4 from POS: Oval should be clear on all 4 and filled when
any of them has a Package selected at the POS.
u) Home the machine from the HMI at the USER/CARRIAGE HOME (see
Input Screen at right) This is the default status with 2 Photo-Eyes
except CARR ENCODER and TIRE PHOTO

12) De-Stroke Arms if Necessary
De-Stroked Arms will require Bumper Extensions. Keep in mind that the entrance and exit arms have different
components. The entrance arms use Entrance Cylinder Stops (part #7300) and the exit arms use Exit Cylinder Stops
(part # 7340). Both entrance and exit use Posi-Stops (part #7310). See images below for identification.

Entrance Arm Cylinders

Install part numbers 7300 and 7310 as shown below and adjust the Reed Switch.

Reed Switches

7300
7310

Exit Arm Cylinders
Install part numbers 7340 and 7310 as shown below and adjust the Reed Switch.

7310
7340

1MANUL220 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 10-7