Page 102 - Saber® Installation & Startup

INSTALLATION & STARTUP

Chapter 6 Frame and Carriage Assembly

Manifold Knuckle Assembly

Overview

Access hole
(behind hose)
MUST be towards
the bottom

Knuckles

Vertical manifolds Plastic spacers

CAUTION

It is very important that the manifold knuckles are in the correct orientation. There is a top and
a bottom. THEY MUST NOT BE REVERSED! See images below for details.

Knuckle Assembly Overview
This assembly has two Reed Switches located under the black rubber “boot”. The Reed Switch detects when the
knuckle has been pushed out of its proper location.

Reed Switch

Reed Switch

6-40 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL290