Page 90 - Saber® Installation & Startup
P. 90
INSTALLATION & STARTUP
Chapter 6 Frame and Carriage Assembly
Frame Assembly (Hybrid)
Securing the Frame to the Wall
3) Carefully raise the frame assembly up to the line you previously marked on the wall. This will set the bottom
of the rail of the Saber at 106-1/2” off of the lowest point of the floor.
4) Loosely secure the two legs to the frame. Do not fully tighten into place yet.
6-28 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL290
