Page 28 - DuraTrans XD® Conveyor

DURATRANS XD® CONVEYOR

Installation

Securing Chain Links to Rollers

Parts Identification

Roller Link (1) Roller Pin (2) Green Middle Roller (2) Black Inner Roller (2)

Side Plate (2)

These Rollers correlate the
This link has a direction arrow on top These Rollers rides on the steel Roller Assembly and Chain
on all three levels of the
that should point to the exit of the surfaces of all three level of the Conveyor. It also makes
tunnel when facing up. Conveyor. contact with the tires.

The DuraTrans-XD Rollers are factory-assembled and shipped with two X458 Side Plates
and two X458 Roller Pins.

Roller Top View

When installed correctly the
Close-up of nut nut should be on Driver Side
when viewed from the top

Helpful Hint

A completely assembled Roller is equivalent to 8” of chain length.
Follow the illustrated steps below to assemble the supplied chain pieces onto a Roller.

Note: The Rollers must be installed “forward” (with the Side Plates and Roller Pins behind the
Rollers) as shown below.
1. Locate the pieces 2. Place one Pin and 3. Position the second 4. Make both Links 5. Place the second
below one Link as shown Link on the first Pin parallel Pin

Note: The near Roller is the Passenger Side Roller. The bolt head, not the nut is visible.

24 Belanger, Inc®. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL010