Page 86 - DryLite® Dryers

®
DRYLITE DRYER

Chapter 8: Maintenance

Trouble Shooting

Problem Solution
Excessive Shaking • Inspect Impellers for debris in or on the fins
• Inspect Impellers for nicks and/or cracks
• Inspect Impellers for dirt build-up

• Check for loose or missing mounting bolts

Motor Starter Tripping • Check all electrical connections for loose and/or
arced wires
• Verify amp load is not higher than recommended
settings and the Impeller is properly balanced

• Confirm that the Ohm’s output on the motor and
leads is correct

LED in Nozzles not working • Check the wiring between the Main Power and the
LED Wires in the Electrical Enclosure Box on the
Nozzle
• Verify the Controller has been programmed properly

82 Belanger, Inc. * PO BOX 5470. * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL960