Page 43 - TopWinder®

®
®
TopWinder

Installation

Connecting the Motor and Slip Ring to the Drive Shaft

14) Secure the Slip Ring to the Slip Ring Shaft by tightening the four (4) fasteners located on the
Inside Shaft Collar of the Slip Ring.

Step 14:
Secure the Slip Ring to the
Slip Ring Shaft using the
four (4) setscrews on the
Inside Shaft Collar.

15) Attach the Wire Retainer Disk to the top of the Slip Ring Shaft using the two 8-32 X 1/2” screws.

Step 15:
Attach the Retainer Disk
to the Slip Ring Shaft.

16) Route the 24VDC LED Power Supply Cable and Motor Wires, coming out of the Arm Assembly,
through the Conduit supplied and into the bottom of the Motor Cover.

Motor Cover

Motor Wires 24VDC LED
Power Supply Cable

Driver Side Arm

Conduit

1MANUL755 Belanger, Inc.® * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 39