Page 27 - GuardII+ Series 4208 Platform User Manual
P. 27
Installation
Figure 5-2 Remove Electronics – Fiberglass Enclosure
Once the corner screws are loosened, remove the entire electronics assembly from the
enclosure.
5.5. Drill Enclosure Holes
WARNING:
DO NOT drill holes into the GuardII+ enclosure until the electronics have
been removed or the monitor may be damaged. Refer to Section 5.4 for
details on removing the electronics.
NOTE:
Depending on the specifics of installation, it may be more convenient to
mount the enclosure before drilling the holes. Refer to Section 5.6 for
mounting details.
21
www.irispower.com
