Page 33 - HSSE Contractor Requirement

HSSE REQUIREMENT FOR CONTRACTOR, ALLO TECHNOLOGY
EDITION 01

I. Product identifier
II. Signal word
III. Hazard statement
IV. Precautionary statement
V. Supplier identification
VI. Pictogram

7.4. Packaging and Transportation
All hazardous materials shall be properly contained and packaged inclusive of relevant documentation
before it is being transported as per requirements in Part III of Occupational Safety and Health
(Classification, Labelling and Safety Data Sheet of Hazardous Chemicals) Regulations 2013.

Appropriate fire-fighting equipment and PPE shall be kept in the vehicles carrying hazardous materials
for emergency purpose. Workers who attend to the vehicles must be fully aware of the potential
hazards of the conveyed goods.
7.5. Handling
All workers handling or supervising any hazardous materials shall have sound knowledge of the
potential hazards and the appropriate actions to take in case of an emergency. The wearing of PPE is
essential for any close contact with hazardous materials.

Hazardous materials shall never be mixed with other materials (either hazardous or inert) without a
complete knowledge of possible reactions between the two. Any query about the handling of
hazardous materials shall be directed to The Employer HSE.

7.6. Safety Data Sheet (SDS)
Relevant SDS must be provided by the contractor as required under Regulation 13 Occupational Safety
and Health (Classification, Labelling and Safety Data Sheet of Hazardous Chemicals) Regulations 2013.
The information shall be in the national language and English language.
SDS shall be obtained from the supplier and the hazardous materials shall not be used until such
information is obtained.