Page 96 - Saber® Installation & Startup

INSTALLATION & STARTUP

Chapter 6 Frame and Carriage Assembly

Boom Orientation Overview
If your equipment room is on the driver side, move on to the next section.
The Saber® can be operated with either a driver or passenger side equipment room orientation.
The default configuration from the factory will be shipped as a driver side equipment room.
Changing the orientation of the Saber® to a passenger side configuration will require the Saber®
High-Pressure Valve to be reconfigured to the driver side of the machine. This change needs to be
made which will allow the feed hose to have the proper bend radius.
The image below shows the passenger side configuration which will end up being a mirror image of
the standard driver side configuration.

High-Pressure Valve orientation 45°
for a passenger side equipment
room location.
The machine ships with the The Valve Assembly will have to be
driver side equipment room rotated 180° and moves to the
being the default position. If your opposite side of the Carriage.
building has a passenger side
equipment room, then it should The plug on the bottom and the pipe
be configured to reflect this on the top will exchange ports.
image. Be sure the hose connections remain
in the same orientation.
Note that the pipe is turned to 45°

6-34 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL290