Page 27 - H2AIR® Arch

®
H2AIR ARCH

Installation
Tunnel Placement

7) Position the outside edge of the passenger side foot plate on the marked line, 139-½” from the
outside edge of the driver side foot plate, as shown below.

Passenger Side
Driver Side

90-1/4”
Height
Clearance

Floor Line

Outside edge of View of the ENTRANCE side of the H2AIR® Arch Outside Edge of
Driver Side Foot facithe ENTRANCE side Passenger Side
Plate Foot Plate

139-1/2”
8) Confirm that the driver side and passenger side foot plates are square to each other by taking two
measurements and confirming that they are equal to one another:
 Measure from the exit end of the driver side foot plate to the entrance end of the
passenger side foot plate.
 Measure from the entrance end of the driver side foot plate to the exit end of the
passenger side foot plate.

9) Measure from the floor to the tip of the DryLite™ Dryer Nozzles, as shown in the image above.
This measurement should be 90-1/4”, shims or plates may be used if necessary to achieve the
appropriate height.

1MANUL958 Belanger®, Inc. *PO BOX 5470 *Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 23