Page 17 - Wagp_InterfaceElectronic_Volume4_2015_US.pdf

WAGO Interface Modules 0

15

WAGO Interface Modules Subminiature-D connectors
acc. to DIN 41 652 or MIL-C-24308
Interface modules connect electronic to
electromechanical functions at the control Interface modules for male and female
level. connectors are available with 9, 15, 25,
They connect: 37 or 50 contacts. Compared with the
standard solder connection, the mating
• signal transmission, connector with IDC connection offers
control system ↔ field
additional advantages.
• signal distribution,
control system ↔ field.
They allow prefabricated plugs to inter- Connectors
face to discrete field wiring. acc. to IEC 60603/DIN 41 612,
types C, E and F
WAGO AUTOMATION offers a wide These connectors are frequently used for
range of interface modules for commonly compact input and output component
used connector types. The use of these groups and are available for
interface modules offers the following 32-, 48- and 64-pole pin and socket con-
advantages in the system wiring: nectors, as well as for mating
connectors with solder and IDC contacts.
• easy and time-saving planning and
calculations
• rapid wiring, starting and fault
elimination by clearly arranged wiring
and clear pole marking, reduction of
wiring faults
• safe and maintenance-free connection
of the signal lines with the
®
CAGE CLAMP terminal strips
• high packing density creates
space-saving modules

The interface modules are standard in
a universal mounting carrier for DIN 35
carrier rails with the following
connectors: Connectors acc. to IEC 60603-1 /
DIN 41 651 or MIL-C-83503
Interface modules with 10-, 14-, 16-,
20-, 26-, 34-, 40-, 50- and 64-pole con-
nectors are available for ribbon cable
connectors.