Page 89 - FreeStyler® Maintenance Manual
P. 89

®
                       MAINTENANCE


                       Chapter 3 General Repairs


                       Drive Motor

                          4)  Tighten the jack bolt on the safety roller bracket to lift the driver’s side roller off the rail so you
                              can turn the key to the proper position. See the image below.




                              Note:  Use both safety
                              brackets in order to jack                                   Safety Bracket (4)
                              the machine up evenly.                                      Jack Bolt (4)



                                                                                          Jam Nut (4)

                                          Rail (2)

                          5)  Put anti-seize onto the shaft and place the new motor onto the shaft. See the image below.














                                                Apply Anti-Seize Here








                          6)  Reattach  the  torque  arm  to  the  new  motor/gearbox  and  tighten  down  the  bumper
                              compression bolts on the end of the torque arm.







                                  Motor/Gearbox












                                                                                 Bumper and Bumper
                                        Torque Arm                               Compression Bolt (2)

                        1MANUL222               Belanger, Inc.® * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681                  3-25
   84   85   86   87   88   89   90   91   92   93   94